Máy Đo Độ Nhớt BrookField CAP 2000+

Máy Đo Độ Nhớt BrookField CAP 2000+
Model: CAP 2000+
Hãng sản xuất: Brookfield

Thông số kỹ thuật:

MODEL SELECTION: CAP 2000+ Viscometer
Viscosity Range	SPEEDS
MODEL	Min.	Max.	RPM	Number of Increments
CAP 2000+	See chart below	5-1000	995

CAP 2000+ HIGH Torque Cone Viscosity Ranges (Poise) Spindles 01-05
Cone Spindle: Sample Volume ( μ L) : Shear Rate (sec-1):	CAP01 67 13.3N	CAP02 38 13.3N	CAP03 24 13.3N	CAP04 134 3.3N	CAP05 67 3.3N
CAP 2000+ @ 5-1000 rpm	.2-375	.4-750	.8-1.5k	1-3K	3-6k

CAP 2000+ LOW Torque Cone Viscosity Ranges (Poise) Spindles 01-05
Low torque is used for applications requiring low shear rates for low/medium viscosity fluids, an optional low torque 797-7,970 dynes•cm instrument can also be ordered.
CAP 2000+ @ 5-1000 rpm	.2-16	.2-32	.2-66	.2-130	.2-260

CAP 2000+ HIGH Torque Cone Viscosity Ranges (Poise) Spindles 06-10
Cone Spindle: Sample Volume ( μ L) : Shear Rate (sec-1):	CAP06 30 3.3N	CAP07 1700 2.0N	CAP08 400 2.0N	CAP09 100 2.0N	CAP10 170 5.0N
CAP 2000+ @ 5-1000 rpm	8-15k	.78-625*	3.13-2.5k*	12.5-10k*	1-1k*

CAP 2000+ LOW Torque Cone Viscosity Ranges (Poise) Spindles 06-10
Low torque is used for applications requiring low shear rates for low/medium viscosity fluids, an optional low torque 797-7,970 dynes•cm instrument can also be ordered.
CAP 2000+ @ 5-1000 rpm	.2-660	.2-26	.2-108	.2-440	.2-44

μL = microLiter N = rpm k = 1000 e.g. Cone CAP-01 13.3 x 10 (rpm) = 133 sec-1 * Maximum speed recommended with this spindle is 400 rpm. Viscosity range indicated is for operation at 400 rpm. Note: Viscosity ranges shown are for illustration; the exact range will depend upon instrument configuration.

*Dependant on cone selected. M=1 million K=1 thousand cP=Centipoise mPa·s=Millipascal·seconds